Search results
1 – 3 of 3Mohannad Naser and Venkatesh Kodur
This paper aims to present results from numerical studies on the response of fire exposed composite girders subjected to dominant flexural and shear loading. A finite…
Abstract
Purpose
This paper aims to present results from numerical studies on the response of fire exposed composite girders subjected to dominant flexural and shear loading. A finite element-based numerical model was developed to trace the thermal and structural response of composite girders subjected to simultaneous structural loading and fire exposure. This model accounts for various critical parameters including material and geometrical nonlinearities, property degradation at elevated temperatures, shear effects, composite interaction between concrete slab and steel girder, as well as temperature-induced local buckling. To generate test data for validation of the model, three composite girders, each comprising of hot-rolled (standard) steel girder underneath a concrete slab, were tested under simultaneous fire and gravity loading.
Design/methodology/approach
The validated model was then applied to investigate the effect of initial geometric imperfections, load level, thickness of slab and stiffness of shear stud on fire response of composite girders.
Findings
Results from experimental and numerical analysis indicate that the composite girder subjected to flexural loading experience failure through flexural yielding mode, while the girders under shear loading fail through in shear web buckling mode. Further, results from parametric studies clearly infer that shear limit state can govern the response of fire exposed composite girders under certain loading configuration and fire scenario.
Originality/value
This paper presents results from numerical studies on the response of fire exposed composite girders subjected to dominant flexural and shear loading.
Details
Keywords
Venkatesh Kodur and Mohannad Z. Naser
This purpose of this paper is to quantify the effect of local instability arising from high shear loading on response of steel girders subjected to fire conditions.
Abstract
Purpose
This purpose of this paper is to quantify the effect of local instability arising from high shear loading on response of steel girders subjected to fire conditions.
Design/methodology/approach
A three-dimensional nonlinear finite element model able to evaluate behavior of fire-exposed steel girders is developed. This model, is capable of predicting fire response of steel girders taking into consideration flexural, shear and deflection limit states.
Findings
Results obtained from numerical studies show that shear capacity can degrade at a higher pace than flexural capacity under certain loading scenarios, and hence, failure can result from shear effects prior to attaining failure in flexural mode.
Originality/value
The developed model is unique and provides valuable insight (and information) to the fire response of typical hot-rolled steel girder subjected to high shear loading.
Details
Keywords
Mohannad Naser, Rami Hawileh and Hayder Rasheed
This paper presents a numerical study that investigates the performance of reinforced concrete (RC) T-beams externally strengthened with carbon fibre reinforced polymer (CFRP…
Abstract
This paper presents a numerical study that investigates the performance of reinforced concrete (RC) T-beams externally strengthened with carbon fibre reinforced polymer (CFRP) plates when subjected to fire loading. A finite element (FE) model is developed and a coupled thermal-stress analysis was performed on a RC beam externally strengthened with a CFRP plate tested by other investigators. The spread of temperature at the CFRP-concrete interface and reinforcing steel, as well as the mid-span deflection response is compared to the measured experimental data. Overall, good agreement between the measured and predicted data is observed. The validated model was then used in an extensive parametric study to further investigate the effect of several parameters on the performance of CFRP externally strengthened RC beams under elevated temperatures. The variables of the parametric study include applying different fire curves and scenarios, different applied live load combinations as well as the effect of using different insulation schemes with different types and thicknesses. Several observations and conclusions were drawn from the parametric investigation. It could be concluded that successful FE modeling of this structural member when exposed to thermal and mechanical loading would provide a valid economical and efficient alternative solution to the expensive and time consuming experimental testing.
Details